Standard Colors for Your Underground Utilities
It is now easier to know what an underground utility line is for. However, a long time ago, it was difficult to identify these utility lines and so when people try to dig there were many risks involved. Today, the risks have been lessened although not completely eliminated. It is thus important that we know how to identify these underground utilities if there is a need to dig the ground so that you can prevent harm. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. You dont want something disastrous to occur. The worst thing that can happen if lines are not identified is that fatal injuries can happen. The location of the areas where the lines were struck can experience service interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. When the number is called, you can let the utility companies come out and mark their respective lines.
Marking lines may lessen the risks but there are time when accidents still happen. It is said that every 6 minutes, there is a utility line that is struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.
Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. This has made it easier to locate utility lies underground and other important things. Calling 811 is enough for the property owner to let companies located their lines.
It is easier to identify underground utility lines today because they now use different colors for each utility. Here are the colors used for different utilities.
White lines are for proposed excavation sites. You can mark areas with white lines that will soon be excavated.
Pink lines are temporary survey markings. These are used by surveyors to mark off legal property boundaries.
Electric power lines, cable, conduit, and lighting cable use red lines. The color red is perfect for electric works because it is associated with fire and danger.
Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.
Orange lines are used for communication, alarm, signal lines, cable or conduit. Blue lines are used for potable water. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. If you see the color green, then it indicates sewer and drain lines. A project can be derailed for a long time when these utility lines are hit.